www.z-band.com/866-902-2606
5
“GigaBUD 1000” Installation Guide
Layout of Basic System with Shared Sheath for Video and IP
Figure 4
Allows the RF Video (on Pins 7 & 8) and the IP (on Pins 1, 2, 3, 6) to be com-
bined at the GigaBUD 1000 and Separated at the GigaBOB. A port from the
Ethernet Switch is plugged into the top row (Aux) of the GigaBUD and is com-
bine with the RF Video that is on the bottom row. At the GigaBOB the RF Video
is now available at the “F” connector output and the IP is available at the Aux
output.
IP & RF In
IP In
IP OUT
IP & RF
RF OUT
The Z-Band System does not Switch,
Route, Repeat or in anyway interact with
the IP signal.
Figure 3
