background image

YZ Systems, Inc. • 3101 Pollok Drive • Conroe, Texas • USA • 77303 • P: 936.788.5593 • F: 936.788.5720
Page 40

DP-2010RN  ver.05012003

SSSSS

ECTION

ECTION

ECTION

ECTION

ECTION

 11:

 11:

 11:

 11:

 11:  S

  S

  S

  S

  S

Y

YY

Y

YSTEM

STEM

STEM

STEM

STEM

     TTTTT

R

RR

R

ROUBLESHOO

OUBLESHOO

OUBLESHOO

OUBLESHOO

OUBLESHOOTING

TING

TING

TING

TING

BatteryPower

The Z-65 controller, and the low powered solenoid are
normally powered by the Z-65 Battery Assembly. The
battery assembly is not a rechjargable type battery.
Under normal sampling conditions this battery may last
2 years.  A built in warning LED is provided to advise the
operator when the Battery needs changing.

Battery Power
Troubleshooting Steps

1. Set the mode switches as follows, figure 28:

  Position 1, 2 and 3 on

2. Set the time switches to the 01 position,
    figure 29. This will set the solenoid output rate
    to one actuation every one minute (based on
    the factory set time range for the Z-65 model,
   

refer to figure 45, page 44

).

3. Depress the test switch to test the battery.  A
    green LED will illuminate if the battery is good
    and a red LED will illuminate if the battery is
    low, figure 30.

figure 28

figure 29

IMPOR

IMPOR

IMPOR

IMPOR

IMPORTTTTTANT NO

ANT NO

ANT NO

ANT NO

ANT NOTE:

TE:

TE:

TE:

TE:

Time switches must not be in 00 position to test
the battery.

IMPOR

IMPOR

IMPOR

IMPOR

IMPORTTTTTANT NO

ANT NO

ANT NO

ANT NO

ANT NOTE:

TE:

TE:

TE:

TE:

The solenoid must be connected to test the
battery condition.  Battery condition cannot be
tested with a volt meter.

figure 30

Содержание DynaPak DP-2010RN






























































Отзывы:

Похожие инструкции для DynaPak DP-2010RN