Yukon LWO-112, Руководство пользователя

Страница: 6 / 68

6
This furnace is designed to burn oil or gas and coal and natural wood only. Higher efficiencies and lower emis-
sions generally result when burning air dried seasoned hardwoods, as compared to softwoods or to green or
freshly cut hardwoods.
DO NOT BURN:
(1) Garbage;
(2) Lawn clippings or yard waste;
(3) Material containing rubber; including tires;
(4) Materials containing plastic;
(5) Waste petroleum products, paints or paint thinners, or asphalt products;
(6) Materials containing asbestos;
(7) Construction or demolition debris;
(8) Railroad ties or pressure-treated wood;
(9) Manure or animal remains;
(10) Salt water driftwood or other previously salt water saturated materials;
(11) Unseasoned wood; or
(12) Paper products, cardboard, plywood, or particle board. The prohibition against burning these
materials does not prohibit the use of fire starters made from paper, cardboard, saw dust, wax and
similar substances for the purpose of starting a fire in this furnace.
NOTE: This furnace can be started automatically using the oil or gas. Put wood in the firebox and turn up
the liquid fuel thermostat until the wood lights on fire. Once the fire is established, turn the wood
thermostat up to call for the temperature that you want.
WARNING: Burning these materials may result in release of toxic fumes or render
the furnace ineffective and cause smoke!
CAUTION: Do not turn wood thermostat down or off while the firebox is full. This
will cause the furnace to damper down and smolder, which could cause creosot-
ing of the furnace or chimney pipe.
EPA Compliance Requirements