Yuel Beast Designs Motif Monument, Руководство по сборке

Страница: 4 / 6

4
Backplate
Backplate standoffs (4)
GPU mounting fastener (1)
PSU mounting fastener (4)
Baseplate
I/O flange
Power button clearance hole
Built in Motherboard
Standoffs (4)
Motherboard Standoffs (4)
Motherboard plate
Motherboard plate cut out
Assembly Instructions
1. Locate the 4 motherboard stand-offs that are built into the
chassis and fasten your motherboard into place. Monuments
manufactured prior to 2021 have threaded holes, where standoffs
can be screwed in by hand.
2. After installing the motherboard and seating the GPU in the PCI
Slot, screw the GPU mounting fastener into the threaded hole on
the edge of the I/O flange.
3. Mount the PSU to the four through holes on the bottom portion of
the chassis.
4. Wrap the O-ring around the power button at the base of the
threads. Insert the button into the through hole on the backplate
and secure it with the silver hex ring.
5. Insert the ferrule ends of the power button wire into the terminals
and tighten the two screws.
6. After running the PSU cables through the motherboard plate
cutout, mount the backplate to its four standoffs using the
backplate fasteners. Again, early versions of the Monument will
have tapped holes for the backplate standoffs to be screwed in.