Yuchai YC310LC-8, Руководство по эксплуатации

Страница: 91 / 184

Moving of the Machine
1. Safety principle of moving the machine
1) Before starting the excavator, you should be familiar with the surrounding environment, the
availability of pedestrians and obstacles, and the ground bearing capacity and so on.
2) When starting the machine, please honk to warn others.
3) The drivers are strictly prohibited to start or manipulate the machine on the ground.
4) Walking and operation of the excavator must be on the road 1.5 times width than that of its own.
5) When walking though the underground passage, the bridges, or power lines, you should have the
gesture command.
6) When walking, you must lower the boom, stick to maintain the best gravity position.
7) When walking, nobody but the driver is allowed to be on the machine.
8) When working on level road for a long distance, the platform is unlocked. But the platform must be
locked on uphill and downhill.
9) Before operating steering handle, you should check the direction of the track frame.
10) If the blade is at the back, the manipulation of the control rod is to the contrary
11) Do not let anyone in the area around the machine.
12) Clear all the obstacles on the walking line of the machine.
13) The rear of the machine is a blind spot, so when reversing, please pay special attention.
2. Equipment of moving the machine
Warning: The sudden convert of control rod in the high-speed walking is
dangerous.
1) Do not suddenly transform the control rod; otherwise it will cause a sudden
movement.
2) Avoid a sudden switch to the control rod from the forward to backward (or from
backward to the forward).
3) Avoid sudden conversion of the control rod, such as a sudden stop from high
speed (release the lever)
Pull the throttle knob or handle to the high-speed
position to increase the speed of the engine.
4-8