Yuchai YC310LC-8, Руководство по эксплуатации

Страница: 86 / 184

Engine Operation
1. Checking before starting the engine
1) Check if the seat belt is fastened, and honk to confirm there is nobody around the workplace and
below or above the machine.
2) Check the windows, and check if the rear-view mirror can provide good visions.
3) Check if there is dust or dirt around the engine, battery, and radiator. If any, please remove it.
4) Check if the working device, cylinder, connecting rod and hydraulic hose have split, transition wear
or clearance. If abnormal, please replace or repair.
5) Check if the hydraulic equipment, hydraulic tank, hoses, and fittings are leaking.
6) Check the lower part of the body (track, sprocket, idler, etc.) For damage, wear, loose bolts or
leaking.
7) Check if the meter display is normal, if the wok lights can work normally, and if the electrical wiring
has short circuit or open circuit phenomenon.
8) Check whether the coolant level, fuel level, hydraulic oil level, and engine oil level are between the
upper and lower limits.
9) In the cold weather, Check if the coolant, fuel, hydraulic oil, rechargeable batteries, oil and
lubricants are frozen. If any, they should be thawed before starting the engine.
10) Check if the left control box is in the locking state.
11) Check the working condition, direction and location of the machine to provide information for the
operation.
Warning
：
Before starting the engine, please refer to the safety details in this
operation manual. Read all the safety signs on the machine. There should not be
other people in the workplace. Before the operation, you should learn and practice
the safe operation firstly. During the operation, you must be clear and follow the
partial sections and chapters about the safety operation and maintenance in the
instructions, and also should comply with relevant laws and regulations.
4-3