Fire Prevention, Explosion-proof and Anti-poisoning
●
When refueling, do not let the fuel overflow the overheating surface or the components of the
electric system.
●
After refueling, wipe the spilled fuel or oil, and tighten the cover of the fuel tank and the oil tank.
●
Promptly clear the leaves, wood, paper and other combustibles accumulating or stuck in the
engine, exhaust pipe, muffler and engine compartment.
●
Do not place the oil-soaked rag inside the machine to avoid spontaneous combustion and fire.
●
Configure the fire barrel inside the machine, and put it in place to get readily.
●
Welding the machine must be carried out in the condition that the hydraulic tubing and the fuel line
have been isolated.
●
Prevent fires caused by hydraulic piping: Check all the hoses, clamp tube and shield, as well as
check if the cushion is fixed firmly, the loose of which will cause vibration and friction with other
parts in the operation, leading to the damage of the hose, oil-spraying of the high pressure oil and
even a fire or serious injury.
●
Make the battery away from the fire source and avoid the high temperature, otherwise an explosion
may be caused.
●
If the cab of the excavator is sealed, the tightness of the middle partition should be checked to
prevent the engine exhaust into the cab, which will make the driver poisoned.
●
Never work in a poorly ventilated work area to prevent the choking of the driver.
●
In case of fire, do not put out the fire with water, but the powder fire extinguishers or sand. You can
also use the cover or tarpaulin to cover the fire off.
●
The excavator should be avoided to contact
with the electric wires when it is in
transportation, walking or digging, otherwise
serious injury and death may be caused.
●
Please always check the appliance and
circuit of the machine. If any damage, injury,
or aging are found, they must be changed
promptly to avoid the short circuit that can
cause a fire.
●
Maintain the wire connectors clean and fixed.
You should have a daily check of the electric
wires, tighten the loosen fittings and repair
the damaged wires.
●
Do not place the flammable and explosive
items inside the machine to prevent the fire.
●
When refueling, the engine must be stopped.
You should refuel in a place far away from
the fire source, and cannot leave the
machine.
2-36
Содержание YC310LC-8
