Yuchai U35, Руководство оператора

Страница: 123 / 157

5-20
Engine lubricating system
Maintenance instructions
Oil volume ....................................................................................... 7L
Oil level check ................................................................................. Every 10 operation
hours or every day
Change the oil or replace the fuel filter element ............................... Every 500 hours of
operation
1. Check the oil level
Before starting a new engine, check the
oil level once, and thereafter check every
10 hours.
1) Park the excavator on a level ground
and stop the engine.
2) Open the engine hood, take out the oil
dipstick, and observe the sticky part on
the oil dipstick. The oil level should be
located between the minimum (L) and
maximum (H) marks.
3). If necessary, you can fill oil from the oil
port to make the oil level reach the
specified value.
Warning: The components and oil are still at high temperatures upon
shutdown of the engine, which can cause serious burns. Maintenance is
allowed only after the temperature has dropped.
2. Replace the engine oil
The oil shall be changed after new machine
works for 50 hours, and then it will be
changed every 500 hours.
1) Park the excavator on a level ground and
stop the engine, and drain the oil while it is
hot.
2) Remove the oil drain plug to make the oil
flow out completely.
Avoid inhaling oil vapor, swallowing, and prolonged contact with used oil.