YuanDong GT2-SM, Руководство пользователя

Страница: 5 / 23

5
3. The Chain Sprocket on the Wheel must align within 1/2 cm to the Chain Sprocket on the Engine .
4. The wheel chain sprocket is mounted with teeth-out and dish-in next to spokes. SEE FIG. #2
Place Sprocket’s bright chrome side inward next to spokes with dished side outward:
Figure #2
-
9 slot
-
Chain Wheel Sprocket mounted concave dish side inward:
Options available from your dealer:
Model #1 HD axle kit: Chrome Tank Chrome engine parts available:
The drive chain can be easily shortened to the correct length. Special tools are required to remove and
replace the master link when shortening the chain by removing links. Ideally, both your
pedal drive chain
and your engine drive chain should have the same tension.
A. Remove left rear cover plate from engine. This is the plate next to and under the clutch swing arm.
B. MASTER LINK
B Your engine may come with a standard bike chain or with a Heavy Duty 415 chain depending on how it
was ordered by your dealer. Engine drive sprockets are different depending on chain size. The 415
chain uses a wide drive sprocket and the std. bike chain uses a narrow one. A 415 chain will work with a
5 plates:
9 - 4.8 M6
bolts with
lock nuts:
2 rubber
cushions.