YTTEK YTPC100 Series, Быстрый старт, Страница: 18 / 48

Page18 of 48
5. Platform Software Quick Start
When the platform power is turned on and the network connection is confirmed, users can enter the
folder: “ .\release ” to initialize the platform. (The detail introduction of APIs in Chapter6.)
5.1 Step1: Initialization
First, enter “Init(type)” in the command window to initialize the platform.
⚫
Type
→
0: all platform are single, 1: Master slave mode. (If type is not entered, the default is
0.)
If the initialization is complete, the console would show the message “Software version:2.5.2456, HW
Version: xx” and “Initial Completed! ”.
The folder “Tool” contains all APIs for users. The related path of “Tool” will be added after platform be
initialized.