Ytc YT-2300 Series, Руководство пользователя, Страница: 19 / 25

- 37 -
⇨ ⇨ ⇨ ⇨
(4) Push <DOWN>. (5) Push <ENTER>. (6) Push <ENTER>
after adjustment
with <UP>,<DOWN>.
⇨ ⇨ ⇨
(7) Push <ESC>. (8) Push <ESC> twice. RUN Mode
KI
(1)-(3) Adjustment method and procedure is as same as dEAdZONE.
(4) Push <DOWN> twice at dEAdZONE mode, then KI mode is displayed.
(5) Push <ENTER> at KI mode and *KI message is appeared on LCD.
(6) Adjust KI value with <UP> or <DOWN>. Adjusted value is applied at once without
additional operation, so users can easily check its adjustment by changing current input
signal to YT-2300. It means that optimum control value is found by adjusting values
during valve operation. Push <ENTER> to save the value and +KI message is on LCD.
(7) Push <ESC>.
(8) Push <ESC> twice to return to RUN mode.
⇨ ⇨ ⇨
(1) Push <ENTER> (2) Push <DOWN> twice. (3) Push <ENTER>.
for 6 seconds.
⇨ ⇨ ⇨ ⇨
(4) Push <DOWN> twice. (5) Push <ENTER>. (6) Push <ENTER>
after adjustment
with <UP>,<DOWN>.
- 38 -
⇨ ⇨ ⇨
(7) Push <ESC>. (8) Push <ESC> twice. RUN Mode
Kd
(1)-(3) Adjustment method and procedure is as same as dEAdZONE.
(4) Push <DOWN> three times at dEAdZONE mode, then Kd mode is displayed.
(5) Push <ENTER> at Kd mode and *Kd message is appeared on LCD.
(6) Adjust Kd value with <UP> or <DOWN>. Adjusted value is applied at once without
additional operation, so users can easily check its adjustment by changing current input
signal to YT-2300. It means that optimum control value is found by adjusting values
during valve operation. Push <ENTER> to save the value and +Kd message is on LCD.
(7) Push <ESC>.
(8) Push <ESC> twice to return to RUN mode.
⇨ ⇨ ⇨
(1) Push <ENTER> (2) Push <DOWN> twice. (3) Push <ENTER>.
for 6 seconds.
⇨ ⇨ ⇨ ⇨
(4) Push <DOWN> (5) Push <ENTER>. (6) Push <ENTER>
three times. after adjustment
with <UP>,<DOWN>.
⇨ ⇨ ⇨
(7) Push <ESC>. (8) Push <ESC> twice. RUN Mode