YSI 5200A
73
YSI 5200A
72
ICONS
(Sensor & Aux)
Significance
Notes
sensor system is in alarm
low range control relay is energized
(to raise sensor value)
control icons do not appear
for aux systems
high range control relay is energized
(to lower sensor value)
control icons do not appear
for aux systems
DO low range 2 control relay is
energized (to raise sensor value)
DO high range 2 control relay is
energized (to lower sensor value)
PID/PWM control mode system is
active
Table 4.3
Menus
5200A firmware is structured using menus that enable you to easily configure and
view system status, messages, and logs. The menu structure and screen formats are
very intuitive. Menus are structured in hierarchical fashion. See Appendix 3 “Menu
Maps” - beginning on page 226. For example, figure 4.3 illustrates the menu path
to configure data logging interval.
Configuring the 5200A
Run Screen
Menus
System
Data Logging
Data Logging
Data Logging (Enabled) (1 Hour)
Logging Interval
Time units
Run Screen → Menus → System Menu
� Data Logging�Logging Interval
Menu Hierarchy
after numeric keypad entry and return to “Data Logging” menu
to save configuration and return to Run Screen
7)
8)
Steps to configure data logging interval:
1) select “Menus” at Run Screen
2) select “System” at Main menu
3) select “Data Logging” at System menu
4) select “Data Logging” at Data Logging menu
5) select “Logging Interval” at Data Logging menu
6) input logging interval (1-255) at
(numeric keypad)
Figure 4.3
Configuring the 5200A
