YSI 5000, Руководство по обслуживанию

Страница: 12 / 50

YSI Incorporated Model 5000/5100 Service Manual 8
4.4 SYSTEM SETUP
From the Setup menu, press the [SYSTEM] soft-key to display the following menu.
8.38
*
mg
/L
24.38°C 11:47
AM
AUDIO off TIME / DATE VERSION RS232
The [AUDIO on/off] soft-key allows setting the beeper on or off. The key toggles between an
[AUDIO off] soft-key and an [AUDIO on] soft-key. The present state of the beeper would be the
OPPOSITE of the function shown on the soft-key. If the beeper is currently on, the soft-key
shows “AUDIO off”; i.e., your alternate choice.
The [TIME/DATE] soft-key brings up the following menu to allow setting of the date and time.
Time/Date
09:58:04
01/20/96
UP DOWN DIGIT NEXT
Use the UP, DOWN, DIGIT and NEXT soft-keys to enter the time in 24-hour format. The
display digit that is flashing is increased or decreased by pressing the [UP] or [DOWN] soft-key.
If the [UP] or [DOWN] soft-key is held down, the digit will continue to change until the key is
released. After you have set the hour, press the [NEXT] soft-key to move to the next parameter,
minutes. Repeat the process for the remaining parameters.
When you have finished entering the time and date, press [ENTER] to confirm and return to the
system setup menu. The message
“TIME SETTING SAVED”
will be displayed on the message line
at the bottom of the screen. The Time/Date sub-menu can be left without making any changes by
pressing the [MODE] key instead of [ENTER].
8.38
*
mg
/L
24.38°C 9:59
AM
TIME SETTING SAVED
AUDIO off TIME / DATE VERSION RS232
The [VERSION] soft-key displays the software version of the instrument on the message line of
the display just above the soft-key descriptions.
The [RS232] soft-key displays the RS232 setup.
System
System
Flashing Digit
Message