YSI 1500 Sport Скачать руководство пользователя страница 94

Страница: 94 / 134

9----8

This fault is generated when the sample concentration exceeds the upper limit of
the dynamic range (30 mmol). No result will be stored in memory.

•

POSSIBLE CAUSE: Sample concentration is too high, resulting in high probe
current.

•

CORRECTIVE ACTION: Dilute sample 1:1 with the same buffer solution being
used in the instrument and repeat.

•

SECTION: 6

•

POSSIBLE CAUSE: Excessive sample carryover on the outside of the
Syringepet needle or capillary tube.

•

CORRECTIVE ACTION: Repeat sampling procedure making sure to wipe
excess sample from the outside of the injection device.

•

SECTION: 6

Temperature Faults

ERR: BAD TEMP

ERR: BAD TEMP
PRESS MENU

PRESS MENU

The instrument will work only over the specified temperature range (5-45°C).

•

POSSIBLE CAUSE: Ambient temperature too cold or hot.

•

CORRECTIVE ACTION: Operate at ambient temperatures between 5 and 45°C.

TEMP UNSTABLE "PRESS

TEMP UNSTABLE "PRESS
MENU"

MENU"

•

POSSIBLE CAUSE: If this fault appears after a sample cycle and no result has
been displayed the sample chamber temperature is changing too rapidly, (more
than 3°C from the sample cycle to the reference cycle).

•

CORRECTIVE ACTION: Allow the instrument supply fluids to equilibrate at
the ambient temperature.

•

CORRECTIVE ACTION: Place the SPORT out of direct sunlight and allow
several minutes for stabilization.

TEMP CHANGE

TEMP CHANGE
FLUSHING...

FLUSHING...

Содержание 1500 Sport







































































































































Результаты поиска

Содержание 1500 Sport

Отзывы:

YSI 1500 Sport, Руководство пользователя, Страница: 94 / 134

Результаты поиска

Содержание 1500 Sport

Отзывы: