manualshive.com logo in svg

YSI 1500 Sport, Руководство пользователя, Страница: 130 / 134

Поделиться
Скачать
YSI 1500 Sport Скачать руководство пользователя страница 130

 

 

18

18

18

18----2

2

2

2  

Pennsylvania 

 

Fisher Scientific ISD 

•

 585 Alpa Drive 

•

 Pittsburgh, PA 

•

 15238 

•

 Phone: 800 395-5442 

Cleaning Instructions

Cleaning Instructions

Cleaning Instructions

Cleaning Instructions    

 IMPORTANT: Before they can be serviced, equipment exposed to 

IMPORTANT: Before they can be serviced, equipment exposed to 

IMPORTANT: Before they can be serviced, equipment exposed to 

IMPORTANT: Before they can be serviced, equipment exposed to 

biological, radioactive, or toxic materials must be cleaned and disinfected.

biological, radioactive, or toxic materials must be cleaned and disinfected.

biological, radioactive, or toxic materials must be cleaned and disinfected.

biological, radioactive, or toxic materials must be cleaned and disinfected. 
Biological contamination is presumed for any instrument, probe, or other device 
that has been used with body fluids or tissues, or with wastewater. Radioactive 
contamination is presumed for any instrument, probe or other device that has 
been used near any radioactive source. 

If an instrument, probe, or other part is returned or presented for service without 
a Cleaning Certificate, and if in our opinion it represents a potential biological 
or radioactive hazard, our service personnel reserve the right to withhold service 
until appropriate cleaning, decontamination, and certification has been 
completed. We will contact the sender for instructions as to the disposition of 
the equipment. Disposition costs will be the responsibility of the sender. 

When service is required, either at the user's facility or at YSI, the following 
steps must be taken to insure the safety of our service personnel. 

1.  In a manner appropriate to each device, decontaminate all exposed surfaces, 

including any containers. 70% isopropyl alcohol or a solution of ¼ cup 
bleach to 1 gallon tap water are suitable for most disinfecting. Instruments 
used with wastewater may be disinfected with 0.5% Lysol if this is more 
convenient to the user. 

2.  The user shall take normal precautions to prevent radioactive contamination 

and must use appropriate decontamination procedures should exposure 
occur. 

3.  If exposure has occurred, the customer must certify that decontamination has 

been accomplished and that no radioactivity is detectable by survey 
equipment. 

4.  Any product being returned to the YSI Repair Center, should be packed 

securely to prevent damage. 

5.  Cleaning must be completed and certified on any product before returning it 

to YSI. 

 

Содержание 1500 Sport







































































































































Отзывы:

Нет отзывов