Youshiko YC9460, Руководство пользователя

Страница: 10 / 19

and “ ”buttons to set the required hour.

Press “ ” button to confirm your setting, the Minute display starts to flash. Use the “ ” and “ ” buttons
to set the required minute.

Press “ ” button to confirm your setting, the snooze time of the Alarm starts to flash. Use the “ ” and
“ ” buttons to set the minute of snooze you need.

Press “ ” button to confirm your setting and to end the setting procedure
F.Y.I.:
 After 20 seconds without pressing any button the clock switches automatically from setting mode to
Normal clock mode.
The alarm for opening and closing

The alarm shift switch is pushed in the “ ” position, LCD display the “ ” icon, the alarm function is open,
at the same time, the sound of "BI" sounded.

Product back of the alarm shift switch is pushed in the “ ” position, the “ ” icon disappears, the alarm
function is close
F.Y.I.:
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. In this case the alarm
will be repeated automatically after 24 hours.

Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal
is heard.

The snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze
time unit is minutes.
Switching off the alarm signal
 While the alarm is sounding, press any button except the “ ” button or touch the " " field for
more than 3 seconds to stop the alarm signal.
Snooze Function:
 While the alarm is sounding, Touch the " " field once to activate the snooze function. The alarm
signal sounds again after already been set.

In snooze mode, press any button except the “ ” button or touch the " " field for more than 3
seconds to exit the snooze mode.
F.Y.I.:
When the snooze function is set to OFF, while the alarm is sounding, press “ SNZ ” does not have this
snooze function.
Maximum/Minimum Temperature/Relative Humidity

To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the “ MEM ” button:
Once to show the maximum temperature and humidity values.