aquaMAX
TM
-Basic 360 Series
2-8. The Connection of Reservoir Tank Sensor (Optional)
1. Purpose
With use of a reservoir tank, it protects from overflowing of the produced water.
2. Details
1) Install a tank sensor on the cap of 20L or 50L PE tank.
2) Connect one side of connector of Level Switch Outer Cable to the other connector of which connected to a
tank sensor. The direction of Level Switch Outer Cable doesn’t matter.
3) Connect the other side of connector of installed reservoir tank to Level S/W at the rear side of the system.
3. Caution
The system keeps on
「
Standby
」
mode when the level of water is up at installation of Level Switch. You’re
only able to re-operate the system after reduce the produced water in the tank.
17
