Yosin EVM-2030A Скачать руководство пользователя | Manualshive

Страница: 49 / 84

background image

48

6.

Programming Paths

All-Deletion Commands

SYS_1_00_0_#

This command is used to reactivate Automatic System Configuration mode, restore the
default settings of the System Program and empty the Operator Number list and the
Holiday schedule.

SYS_7_8_1_000_#

This command is used to empty all the Tone Cycle settings and reactivate the Automatic
System Configuration mode.

ADM_2_1_00__0

This command is used to delete all of the recorded greetings. Inputting the last "0" must
wait that the menu voice finishes playing.

ADM_2_9_0000__0

This command is used to delete all the messages of Information Announcements. Inputting
the last "0" must wait that the voice finishes playing.

ADM_5_0000_0000_#

This command is used to empty the Call-Forwarding list and the Hunt Group settings.

ADM_6_0000_0000_#

This command is used to empty the Receptionist list.

ADM_8_0000_000_#

This command is used to delete all mailboxes.

ADM_9_0_0000_#

This command is used to empty all the Mailbox Group lists.

SYS_1: Extension Number (EXTN) Administration

Extension numbers are the numbers that callers dial to identify the transfer destinations of their
calls. An extension number may or may not equal the actual phone number the EVM dials.
Therefore, in this document, the meaning of extension numbers is the numbers that the EVM
allows callers to dial.

A group of extension numbers has the same features. If not specially programmed, an extension
number is the same number as an internal phone number (extension number) of the PBX's.

The EXTN Group administration menu is used to define the desired extension numbers and group
them. Up to thirty-two EXTN Groups can be created; the group numbers of the created EXTN
Groups must be consecutive numbers beginning with 01.

The programming of an EXTN Group contains three settings: the first and the second settings
together defines a group of extension numbers; the third setting may specify a backup extension, a
Remote Switch Access number or a Trunk Group Access code.

If the third setting of an EXTN Group specifies a Remote Switch Access number or a Trunk Group
Access code, the phone numbers included in the EXTN Group are the group external phone
numbers; External Tone Detection and Supervised Transfer are the default features.

«
...
47
48
49
50
51
...
»

Содержание EVM-2030A





















































































Отзывы:

Нет отзывов

Похожие инструкции для EVM-2030A

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды