Yoshitake GDK-2000 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 18

Yoshitake GDK-2000 Скачать руководство пользователя страница 1

EPDT-021a

MODEL GDK-2000

PRESSURE REDUCING VALVE

PRODUCT MANUAL

.

Thank you very much for choosing the Yoshitake’s product. To ensure the correct and safe use of the

product, please read this manual before use. This manual shall be kept with care for future references.
The symbols used in this manual have the following meanings.

Warning

This symbol indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury.

Caution

This symbol indicates a hazardous situation that, if not avoided, may result
in minor or moderate injury or may result in only property damage.

Table of Contents

1. Specifications··························································· 1-2
2. Dimensions and Weights ············································· 2
3. Operation ································································ 3-5

4. Nominal Size Selection

method

4.1 Pressure reducing valve specification selection chart ··· 6
4.2 Safety valve setting pressure chart ··························· 6
4.3 Characteristic chart ············································· 7
4.4 Nominal size selection chart ·································· 8
4.5 Nominal size selection calculation formula ················· 9

5. Installation

5.1 Precaution for installation ····································· 10
5.2 Installing accessories ·········································· 10
5.3 Piping before and after the pressure reducing valve ··· 11
5.4 Piping example ·················································· 12

6. Operation procedure

6.1

Precaution for operation ······································ 13

6.2 Adjusting procedure ············································ 13

7. Maintenance Procedure

7.1 Troubleshooting ················································· 14
7.2 Precaution for maintenance and inspection ·············· 15
7.3 Disassembly ····················································· 15
7.4 Precaution for reassembly ···································· 15
7.5 Exploded drawing ·············································· 16

Warranty Information

1
2
3
...
»

Содержание GDK-2000



















Отзывы:

Нет отзывов