background image

installation errors and modifications—should any of these be found, this warranty is void.  The duration of any and all 

implied warranties are limited to the duration of the express warranty.  All incidental or consequential damages are 

hereby excluded.  The warranty gives you specific legal rights and you may have other rights, which vary from state to 

state.  Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how 

long an implied warranty lasts, so the above limitations and exclusions may not apply to you. 

 

If you have a fitment or other problem, or are missing a part, please double-check this trouble shooting guide first: 

1.

 

Reference your instruction sheet and double-check all drawings and instructions 

2.

 

Make sure muffler clamps are installed correctly (refer to instructions diagram). On many models, there is a right 

and wrong way to install.  Also verify part numbers on headers and tail pipe. 

3.

 

Always make sure to install spring-mounted manifolds and flanges on cylinder head prior to installing headers. 

4.

 

Always take time to examine problems in detail. 

5.

 

When all else fails, call our technical support line at (909) 628-4722.  The technical line is open 9:00am – 4:30pm 

Monday through Friday, Pacific Time.  Please have the following information handy: Year/Make/Model of 

motorcycle, date of purchase, place of purchase, batch dates and part numbers (found on header and tail-pipe 

components). 

6.

 

Also, feel free to ask through online e-mail at [email protected], or fax your question/problems to (909) 591-

2198. 

 

To obtain technical information directly from Yoshimura, call (909) 628-4722. 

Содержание Street Series








Отзывы: