SPECIAL PARTS TECHNICAL SERVICE MANUAL
SUZUKI ‘99-01 GSX-R1300
ST-1 CAMSHAFT
(PART NO.SUXR-341)
This product is designed for racetrack use only. Do not use on the public road.
Cam Profile
Be sure to carefully read the instruction manual before starting installation.
During installation, keep these instructions at hand and proceed with the work in
accordance with the instructions.
These instructions should be retained until the product is scrapped.
:
Indicates a potential hazard that could result in death or injury.
(Reference)
: Indicates special information for smooth work.
: Indicates a potential hazard that could result in motorcycle damage.
9.0 mm
MAX LIFT
102 L.C.
°
44°
20°
0.20 mm
Tappet Clearance
INTAKE
DURATION
250
AT
1 mm
°
CLOSE
OPEN
1mm
1mm
7.8 mm
MAX LIFT
105
L.C.
°
10°
40°
0.20 mm
Tappet Clearance
CLOSE
OPEN
1mm
1mm
KIT contents
- Intake camshaft X 1
- Exhaust camshaft X 1
(Including Cam Sprockets, Flanges, Bolts)
Applicable model
SUZUKI GSX-R1300 (1999-01)
EXHAUST
DURATION
230
AT
1 mm
°
BTDC
ABDC
ATDC
BBDC
During the disassembling procedure do not drop any parts into the
crankcase. All removed parts should be thoroughly cleaned and dried.
Inspections
Inspections
Check Items:
Wear and damage to valve retainers, valve cotter pins,
valve springs, spring seats and lifter buckets.
Wear, damage and looseness of valves and valve guides.
Surface contact positions and contact width of valve
seats.
Wear and damage to cylinder head camshaft journals.
Parts inspection and
replacement of
consumable parts must be
done correctly, otherwise
it may cause serious
damage to the engine.
Other than mentioned, please inspect each part in accordance with the SUZUKI genuine service manual
To remove, install and adjust valve lash for camshafts use the SUZUKI genuine service manual
procedures.
Danger
Danger
Caution
Caution
Caution
Caution
Danger
This product is only intended for use
with the model & year listed below.
