background image

RESEARCH&DEVELOPMENT OF AMERICA, INC.

www.yoshimura-rd.com

5420 DANIELS STREET STE A, CHINO CA., 91710 · (800) 634-9166 · (909) 628-4722 · FAX (909) 591-2198

NOTE:  IN THE STATE OF CALIFORNIA, IT IS ILLEGAL TO MODIFY THE EMISSION CONTROL SYSTEM,  WHICH INCLUDES THE CARBURETORS OF ANY VEHICLE.

You must know how to remove and replace your stock exhaust in order to install this product 
otherwise have it installed by a professional mechanic. Keep all stock parts from your existing 
system as some components may be necessary to install your new Yoshimura exhaust depending 
on the application. Read through all instructions before beginning installation. Exhaust system can 
be extremely hot. Let motorcycle cool down before beginning installation. Always wear hand and 
eye protection and take precautionary measures to avoid injury. 

Street Series

Qualified Manufacturer Declared “Replacement Part ”

2021 ~ 2022

All Street Series systems are:
• Slip-on/Bolt-on applications that do not require tampering with the vehicle's emissions control system. 
• CARB/EPA tail-pipe emissions compliant.
• Marked with appropriate EPA noise labels.
• Not tested for EPA new vehicle noise compliance. 

19140NS720   (TI/CF)

HD Pan America 

Works Finish

RS -12 Titanium Slip-On

Содержание 19140NS720









Отзывы: