YOSensi YO Analog, Руководство пользователя

Страница: 6 / 15

YO Analog User guide v2.0 page 6/15
Device configuration
Configurable parameters
A few parameters must be set in order to send data to the gateway. The default firmware is
configured in ABP connection type with predefined
deveui , appkeyota , keyotaa , nwkskey by MCU.
CONFIGURABLE PARAMETERS
NAME DESCRIPTION POSSIBLE
VALUES
DEFAULT
VALUE
READ/
WRITE
devname Device name LNAN LNAN R
conntype Connection type 0 – OTAA
1 – ABP
1 R/W
deveui Device address EUI 8 B (HEX) predefined R/W
appkeyota OTAA application EUI 8 B (HEX) predefined R/W
keyotaa OTAA key 16 B (HEX) predefined R/W
addrabp ABP device address 4 B (HEX) predefined R/W
nwkskey Network Session Key 16 B (HEX) predefined R/W
appskey Application Session Key 16 B (HEX) predefined R/W
advble Interval advertising Bluetooth [s] MS_INPUT 1 1600 R/W
measinter Measuring and/or sending interval
LoRa [s]
1–999999 300 R/W
measlevel Measuring threshold [%] 2 1–9999 20 R/W
input1 Analog input type 1
1 – 4–20 [mA]
2 – 0–10 [V]
1 R/W
input2 Analog input type 2 1 R/W
input3 Analog input type 3 1 R/W
input4 Analog input type 4 1 R/W
input5 Analog input type 5 1 R/W
input6 Analog input type 6 1 R/W
1 Calculation formula: MS_INPUT = INTERVAL_MS × 1.6.
2 Sets the threshold that is used to save the peak timestamp and value that is between regular.
REV 2.0.0 www.yo sensi . io