manualshive.com logo in svg

York YZ MODEL A, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
York YZ MODEL A Скачать руководство пользователя страница 94

JOHNSON CONTROLS

94

FORM 161.01-OM1 

ISSUE DATE: 6/8/2018

SECTION 3 - OPTIVIEW™ CONTROL CENTER FUNCTIONS AND NAVIGATION

MESSAGE

DESCRIPTION

WARNING – UPS – LINE LOW 

BATTERY VOLTAGE

This auto reset warning is set when all of the following are true for 5 continuous sec-
onds:
   • Control Voltage digital input is high (indicates line power is available)
   • Battery Voltage < Line Low Battery Voltage Threshold
It releases when Battery Voltage > Line Low Battery Voltage Thr 0.1 V.

WARNING – UPS – NOT 

CHARGING

This auto reset warning is set when all of the following are true for 5 continuous sec-
onds:
   • Control Voltage digital input is high (indicates line power is available)
   • UPS Line / Charging digital input is low (indicates UPS not reporting in charge mode)
It releases when any of the following are true:
   • Control Voltage digital input is low (indicates line power is lost)
   • UPS Line / Charging digital input is high (UPS is reporting in charge mode)

WARNING – HARMONIC 

FILTER – DATA LOSS

After initialization has been successfully completed the Micropanel shall request fault 
data and, following receipt of the fault data, status data shall be requested until a fault 
is encountered. The Micropanel shall initiate a command on the data link every two 
seconds. If the Micropanel does not receive a proper reply from the IEEE 519 logic 
board after attempting to communicate ten times in a row, the Micropanel shall display 
the message WARNING - HARMONIC FILTER - DATA LOSS and X’s shall be displayed 
for all 519 data. The VSD logic board shall initiate a command on the data link every 10 
milliseconds. If the IEEE 519 logic board does not receive a legitimate command from 
the VSD logic board within 25 msec of the last legitimate command, the Micropanel 
shall display the message WARNING - HARMONIC FILTER - DATA LOSS, X’s shall be 
displayed for all 519 data and the power supply LED on the 519 logic board shall blink

WARNING – HARMONIC 

FILTER – OPERATION  

INHIBITED

This message is displayed when the function of the Harmonic Filter is inhibited at the 
Control Center. This message is no longer displayed when the function of the Harmonic 

Filter is enabled at the Control Center. The function of the harmonic filter can only be 

inhibited or turned on when the chiller is not running.

TABLE 10 - 

ROUTINE SHUTDOWN MESSAGES

MESSAGE

DESCRIPTION

LOCAL STOP

A local shutdown command has been received by pressing the Keypad Stop key.

REMOTE STOP

A shutdown command has been received from a remote device. Remote Stop com-
mands can be received in Hardwire Remote mode via I/O Board TB3-7 or in BAS 
Remote mode via the SC-EQ Communications card. If the chiller is running when this 
occurs, the chiller performs a soft shutdown.

TABLE 9 - 

WARNING MESSAGES (CONT'D)

Содержание YZ MODEL A











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды