York YR Скачать руководство пользователя страница 68

Страница: 68 / 110

JOHNSON CONTROLS

FORM 160.81-O1 (1020)

ISSUE DATE 10/05/2020

SECTION 2 - OPTIVIEW™ CONTROL CENTER

Optiview Control Center

SECURITY LOG SCREEN

Overview

This screen displays a listing of the last 75 setpoint

changes. They are listed and numbered in reverse order

in which they were changed, with the most recent listed

as number 1. Multiple pages are necessary to display

all 75 changes. Not all setpoints are logged. Service

Technicians refer to list in OptiView Control Center

Service Instructions (Form 160.81-M1).
The details of any setpoint change can be viewed by

navigating to a subscreen that displays the date and

time of the change, Access Level and User ID used to

make the change, the old setpoint value and the new

setpoint value.

Display Only

Category

Displays the category of the setpoint (motor, evapora-

tor, condenser, etc.).

Setpoint

Displays the setpoint that was changed.

New Value

Displays the value that was entered at the time of the

setpoint change.

Programmable

Log Entry

Access Level Required:

SERVICE

Allows the user to select a particular setpoint change

for detail viewing.

Print

Access Level Required:

SERVICE

Generates a detailed report of all setpoint changes list-

ed in the setpoint change log.

Page Up

Access Level Required:

SERVICE

Scroll up in the displayed data (if applicable).

Page Down

Access Level Required:

SERVICE

Scroll down in the displayed data (if applicable).

Navigation

Home

Access Level Required:

SERVICE

Causes an instant return to the HOME screen.

FIGURE 26 - SECURITY LOG SCREEN

00657VIP

Содержание YR















































































































Результаты поиска

Содержание YR

Отзывы:

York YR, Руководство пользователя, Страница: 68 / 110

Результаты поиска

Содержание YR

Отзывы: