York YR Скачать руководство пользователя страница 42

Страница: 42 / 110

JOHNSON CONTROLS

FORM 160.81-O1 (1020)

ISSUE DATE 10/05/2020

SECTION 2 - OPTIVIEW™ CONTROL CENTER

Optiview Control Center

ELECTRO-MECHANICAL STARTER SCREEN

Overview

This screen displays all information pertaining to an

Electro-Mechanical Starter.

Display Only

Motor Run (LED)

Illuminates when the compressor motor is being com-

manded to run.

Motor Current % Full Load Amps

Displays the motor current as a percentage of the Full

Load Amps (FLA) value. For the Electro-Mechanical

Starter this is the data returned by the CM-2 Board.

Current Limit Setpoint

Displays the current limit value in use. This value could

come from a 0 to 20mA, 4 to 20mA, 0 to 10VDC or 2

to 10VDC input in Analog Remote mode, PWM signal

in Digital Remote mode, MicroGateway interface in

ISN mode, or a locally programmed value.

Pulldown Demand Time Left

Displays the time remaining in the programmed

pulldown period if the value is nonzero.

Motor Temperature Switch (Open/Closed)

Displays the present position of the Motor Temperature

Switch. The normal position is closed. It is open when

there is a high temperature condition.

Programmable

Local Motor Current Limit

Access Level Required:

OPERATOR

Allows the user to specify the maximum allowed mo-

tor current (as a percentage of FLA). When the mo-

tor current reaches this value, the slide valve will not

be permitted to load further. If the motor current rises

above this value, the slide valve will unload to reduce

the current to this value.

Pulldown Demand Limit

Access Level Required:

OPERATOR

Allows the user to specify the current limit value (as a

percentage of FLA) to which the chiller will be limited

during the specified pulldown limit time. This value

will override the Motor Current Limit value during this

time period. This function is used to provide energy

savings following chiller start-up.

Pulldown Demand Time

Access Level Required:

OPERATOR

Allows the user to set a period of time for which the

Pulldown Demand Limit will be in effect after the

chiller starts.

FIGURE 13 - ELECTRO-MECHANICAL STARTER SCREEN

LD11550

Содержание YR















































































































Результаты поиска

Содержание YR

Отзывы:

York YR, Руководство пользователя, Страница: 42 / 110

Результаты поиска

Содержание YR

Отзывы: