York YK-EP, Руководство по эксплуатации и обслуживанию

Страница: 86 / 268

Table 74: Display only
Field/LED name Description
Leaving Chilled Liquid
Temperature
Displays the leaving chilled liquid temperature at the evaporator
and the condenser.
Delta T
Displays the temperature that is the result of the Leaving Chilled
Liquid Temperature minus the Leaving Chilled Liquid Temperature
Active Setpoint.
Control State
Displays the control state that the economizer is operating. It could
show Inactive, Cooling Control, or Motor Current, depending on the
panels Capacity Control State.
Load Limit
Displays the Active Load Limit. The following messages could be
displayed: Inactive, None, or Motor Current.
Anti-Surge Limit LED
LED is ON when the Economizer Operation Mode is Economizing
Anti Surge or Boost Anti Surge. LED is off otherwise.
Economizer Head Pressure Displays the economizer head pressure in tenths.
Active Output LED
LED on the panel lights to indicate Pre-Rotation Vanes are active.
PRV Command
Displays the position the Pre-Rotation Vanes are commanded to
open.
PRV Feedback
Displays the feedback data used to calculate the position of the Pre-
Rotation Vanes.
Control Mode
Shows what state the economizer Pre-Rotation Vane state. It may
display Manual, Auto, or Inactive, depending on what is happening
with the economizer.
Table 75: Programmable
Button Access level Description
Manual
Increment
Service
Sets the amount the PRV position signal will Increase or Decrease
when one of those manual control buttons are pressed. (Range is
adjustable from 0.1% to 10%, Default = 10%).
Increase Service
Pressing this button with activate the economizer Pre-Rotation
Vane override and set it to Manual, if it was previously in Auto. It
will increase the Pre-Rotation Vane override position by an amount
equal to the Manual Increment.
Auto Service
Pressing this button will set the economizer capacity control to
Auto. This button will only be shown when the economizer capacity
control is Manual.
YK-EP Style B Centrifugal Chiller 86