manualshive.com logo in svg

York YHAU-CW, Руководство пользователя

Поделиться
Скачать
York YHAU-CW Скачать руководство пользователя страница 24

JOHNSON CONTROLS

24

FORM 155.31-ICOM2.EN.UL

ISSUE DATE: 12/21/2018

SECTION 3 – HANDLING, STORAGE, INSTALLATION AND REASSEMBLY

MOVING THE MACHINE ON ROLLERS

Plan the entrance of the machine.
Do not incline the machine more than 10 degrees. If 

the machine has to be inclined more than 10 degrees, 

the solution and refrigerant will need to be extracted 

beforehand.

Use care not to apply shock to the machine. The ma-

chine is a high-vacuum vessel containing a corrosive 

solution. Use diligence in protecting the machine as 

repair is labor intensive and costly.
When a skid base is used to move the machine on roll-

ers, secure the skid base and place the machine legs 

evenly on the skid base before moving the machine on 

rollers.  

FIGURE 5 - 

MOVING THE MACHINE ON ROLLERS

LD22946_UL

7.86

3.93

Skid base

Approximately 3.93

Approximately 3.93

7.86

Содержание YHAU-CW









































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды