York YHAU-CGN Скачать руководство пользователя страница 98

Страница: 98 / 182

SECTION 6 – OPERATION

FORM 155.32-ICOM2.EN.UL

ISSUE DATE:1/10/2018

JOHNSON CONTROLS

TREND SCREEN

Figure 49 -

Trend Screen

To view the Trend Screen, press the

Trend

button above the History Menu section on the

Data screen.

This screen graphically illustrates the trend of the temperature and the pressure for the
following:

•

Chilled/Hot Water Inlet:

temperature of the chilled/hot water measured as it enters

the evaporator

•

Chilled/Hot Water Outlet:

temperature of the chilled/hot water measured as it leaves

the evaporator

•

Cooling Water Inlet:

temperature of the cooling water as it enters the absorber

•

Cooling Water Outlet:

temperature of the cooling water as it leaves the condenser

•

HG Temperature:

temperature of the solution in the high temperature generator

•

HG Pressure:

pressure of the solution in the high temperature generator

The graphs are updated constantly regardless of the operating status of the chiller-heater.

The display ranges in the Trend screen can be changed.

LD27490

Содержание YHAU-CGN























































































































































































Результаты поиска

Содержание YHAU-CGN

Отзывы:

Бренды по названию

Популярные бренды

York YHAU-CGN, Установка, эксплуатация и обслуживание

Результаты поиска

Содержание YHAU-CGN

Отзывы:

Бренды по названию

Популярные бренды