York YHAU-CE-JE Series Скачать руководство пользователя страница 76

Страница: 76 / 136

JOHNSON CONTROLS

FORM 155.33-ICOM2.EN.GB

ISSUE DATE: 12/4/2017

SECTION 6 – OPERATION

TREND SCREEN

LD21530

FIGURE 29 -

TREND SCREEN

LD21530

Press the

Trend

button on the Data screen to access

this information.
There are two Trend screens. The first screen graphi-

cally illustrates the trend of the temperature for the fol-

lowing:

•  chilled / hot water inlet and outlet
•  cooling water inlet and outlet
•  waste hot water inlet and outlet
•  engine waste gas inlet and outlet

These graphs are updated constantly regardless of the

operating status of the chiller-heater:
The display ranges in the Trend screen can be changed.

See

Change Numeric Values on page 68

for more

information.

LD20278

The button in the lower right corner lets you access the

second Trend screen. Press the

Right Arrow

button to

see the screen.

Содержание YHAU-CE-JE Series









































































































































Результаты поиска

Содержание YHAU-CE-JE Series

Отзывы:

York YHAU-CE-JE Series, Установка, эксплуатация и обслуживание, Страница: 76 / 136

Результаты поиска

Содержание YHAU-CE-JE Series

Отзывы: