![background image](http://html1.mh-extra.com/html/york/20-series/20-series_installation-manual_4665513005.webp)
349215-JIM-B-1008
Johnson Controls Unitary Products
5
RENEWAL PARTS
For authorized replacement parts call Johnson Con-
trols, Inc. National Source 1 Parts outlet at 1-866-523-
9670.
APPROVALS
Design certified by CSA as follows:
•
For use as a cooling unit only with or without
optional electric heat.
•
For use as a forced air furnace with cooling unit
•
For outdoor installation only.
•
For installation on combustible material.
•
For use with natural gas or propane gas.
The installer should pay particular attention to the
words: NOTE, CAUTION and WARNING. Notes are
intended to clarify or make the installation easier. Cau-
tions are given to prevent equipment damage. Warn-
ings are given to alert installer that personal injury and/
or equipment damage may result if installation proce-
dure is not handled properly.
This Product Must Be Installed In Strict Com-
pliance With The Enclosed Installation Instruc-
tions And Any Applicable Local, State, And
National Codes Including, But Not Limited To,
Building, Electrical, And Mechanical Codes.
Incorrect Installation May Create A Condition
Where The Operation Of The Product Could
Cause Personal Injury Or Property Damage.