1. Receiver can be controlled by up to 10 transmitters.
2. Longer than 6 seconds pause between series of button clicks during programming will cause device to switch off from
programming mode without saving any changes.
11. Removing third limit position
12. Removing limit positions
13. Programming another transmitter
METHOD 1:
1. After setting the upper and lower limit positions, it is possible to set the third position (favorite) between those positions.
2. Hold the STOP button for 3 seconds to set the blind in third limit position.
10. Programming the third limit position
Upper limit position
has been set.
An example of the third
limit position
Lower limit position
has been set.
Set the blind
in favourite position
Press
programming
button P2.
Motor will make a sound.
Roller shutter will make short
up/down movements.
Motor will make a sound.
Roller shutter will make short
up/down movements.
Roller shutters will
make 2 short up/down
movements. Motor will
make several sounds.
The third limit position
has been set.
The third limit position
has been removed.
Limit positions
has been removed.
Press
STOP button.
Press
STOP button
Motor will make a sound.
Roller shutters will make short
up/down movements.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Press
STOP button.
Press
STOP button
Press
programming
button P2.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Press programming button P2
on the A remote control.
Remote control
has been programmed.
Motor will
make a sound.
Roller shutters
will make short
up/down movements
Motor will
make a sound.
Roller shutters
will make short
up/down movements.
Roller shutters
will make 2 short
up/down movements.
Motor will make a several
short sounds.
Motor will make a sound.
Roller shutters will make short
up/down movements.
Roller shutters will make
2 short up/down movements.
Motor will make a several
short sounds.
Press
DOWN button.
Press
programming
button P2.
Press
programming button P2
on the A remote control
Press programming
button P2 on the
B remote control.
Press
programming
button P2.
6
