Yongnuo YN565EXII, Руководство пользователя

Страница: 30 / 32

-62-
X. Possible problems during use and solutions
1. The YN565EX II can’t flash
Check whether the batteries is installed in the correct orientation: Please install the batteries in the correct
orientation.
shoe stand hard.
Check the hot shoe contact: Clean the contacts.
Check whether the batteries is exhausted: If the charging is not completed within 20 seconds, the flash will
automatically shutdown. Then you need to replace with new batteries.
2. YN565EX II can’t work as slave unit
Check the slave unit setting: The YN565EX II must be set to SLAVE.
range. Adjust the slave unit’s angle toward the master unit and distance from the master unit.
3. Underexposure or overexposure of photo
Because of the differences among different types of cameras and the personal preference, you may meet
the whole overexposure or underexposure when using this product, and so try to adjust it through the flashing
compensation or exposure compensation.
or whether the exposure compensation, exposure bracketing and other settings relative with flashing are correct.
Check whether the shutter, aperture and sensitivity (ISO) of camera are set too close to the limit of flashing,
Check whether the speedlite is attached to the camera: Slip the speedlite hot shoe stand into the camera hot
Check the slave unit’s situation: Please position the YN565EX II(s) within the master’s wireless transmission