1
2
3
4
5
6
7
8
9
11
10
12
13
14
15
2.Install Battery
When install the lithium battery, please put the battery into battery container
in the direction shown by the arrow. When 1pcs of battery installed, 240pcs
of LEDs can be lighted up. When 2pcs of batteries installed, 480pcs of LEDs
can be lighted up.
NOTE: The battery capacity of YONGNUO NP-F750 reaches up to 5200mAh. When
YN508 is set to the maximum luminous intensity, it will keep working about 150 minutes.
Please take the batteries out when this video light is not used.
1.Startup &Shutdown and Brightness Adjustment
First install the battery or insert DC power, then switch the power switch, the LED
video light is lit, press the 5500K brightness adjustment button, adjust the
brightness of the video light.
2.Power Test
Press Batt power test button, the digital tube will display the battery capacity
reading. As shown in the following picture, the capacity of the left battery is 30%,
and the right battery is 90%.
Note: The battery remaining capacity tested when the luminous intensity is low will
be different from the battery remaining capacity tested when the luminous intensity
is high. The battery capacity tested is how long the service time of YN508 will last
under the current luminous intensity.When using the external power supply, you
press the battery capacity testing button, the screen will shows DC.
3.Channel Switch
Press channel switch button to adjust the LED video light to the channel needed,
and the display screen shows CH1 to CH8. Assume that the channel of L is switched
to CH2, it means that the channel of R is as well switched to CH2. At this moment,
L and R can adjust their brightness mutually. If you have several YN508, you can
control the brightness and switch by group, at most 8 groups.
YN508 has two YONGNUO 2.4G wireless control system. When organize and use
YN508 as a ring light, please adjust them to same channel.
Note: This LED video light supports YONGNUO 2.4G wireless control. Accessories
do not contain remote controller.
4.Mobile APP Remote Control
The product supports mobile remote control , the APP can be downloaded
from the YONGNUO official website or download through scanning the
two-dimension code on the gift box, Moible phone APP will be updated
continuously. Please pay attention to YONGNUO official website for
latest version of APP to get better remote control experience.
1.YN508 is the first two-in-one LED video light designed and made by YONGNUO.
It can be used as a ring light by organizing its structure, or, divided it into two
independent video light. YN508 meets kinds of photographic demand and
supplementary lighting needs.
2.YN508 adopts 480pcs of high-brightness, high CRI (Color Rendering Index) and
high TLCI (the Light Consistency Index) LEDs, which helps the video camera to
increase its color accuracy and perfectly reproduce the color of the shooting object.
3.YN508 can be remote controlled by mobile phone. Download a mobile APP from
the official YONGNUO website, control the LED video light from a mobile phone
and read the current brightness, group and channel settings of the LED video light.
Switch and brightness of at most 8 groups of LED Lights can be separately controlled.
4.YN508 supports multi-channel wireless control. It means that the switch and
brightness of the LED video light can be remote controlled, at the meanwhile, at
most 8 groups of LED video lights can be crossover controlled. (Remote controller
is optional.)
5.YN508 supports dual power input. It supports NP-F series battery and external
DC power supply. It meets kinds of shooting requirements with these two power
supply modes.
6.YN508 adopts YONGNUO proprietary LED constant current driving technology
which does great help to effectively avoid corrugation and stroboscopic flash.
7.YN508 adopts dual LED digital display screen. The display effect is more
stereoscopic and it’s more intuitive when check the power output.
8.YN508 is equipped with a professional U-type stand. It’s more convenient and
swift to adjust the supplementary lighting angle.
Batt
CH
+
+
_
_
Batt
CH
+
_
+
_
Batt
CH
+
+
_
_
Batt
CH
+
_
5500
K
3200
K
+
_
Tighten up the fix knob
2
3
Install the assembly parts
and assembly regulated screws
Install the
stand and
fix knob
3
1.Product Installation
a.Please install this products in the following order.
1
Organize the product
Batt
CH
+
+
_
_
Batt
CH
+
+
_
_
2
Batt
CH
+
+
_
_
Batt
CH
+
+
_
_
Short press will control the brightness
of 1% precision .Long press will rapid
adjust the brightness.
b.This video light can be disassembled and used as two independent lights.
永 诺 专 业 摄 像 灯
Function Introduction
Thank you for using the YN508 LED video light. Please read the manual
carefully and keep this user manual properly for reference.
1.When using this LED video light, please place it under the ventilated
environment.
2.Do not disassemble the product, maintenance or repair of this product
should be carried through by technical maintenance personnel of our
company or technical maintenance personnel authorized.
3.Do not use this product in flammable and explosive place, or where it
can be exposed to moisture.
4.Please keep this product away from the children.
Two NP-F750 series lithium
batteries
Contents: Video light(L
、
R
);
user
manual
(
1
);
U-type stand
(
1
);
A set of set
pieces
(
1
)
Note
:
please
contact
your
dealer
if
the
contents
missing
.
3720LM
480 LED lamp beads
Compatible batteries
External power source
Two12V 2A DC power
supply
430*85*320MM
3200K-5500K
Control distance
<15M
55
。
Product Specificaion
30W(15W and 15W)
1
.
Soft light panel
2
.
Stand fix knob
3
.
mobile phone fix seat
4
.
U-type stand
5
.
Assembly part
6
.
Assembly regulating screw
7
.
Power switch
（
The power supply mode can
be adjusted, : DC supply mode;
: Battery supply mode;
: Off.
）
8
.
LED digital display screen
9
.
Battery container
10
.
DC power port
11
.
Battery latch
12
.
Channel switch button
13
.
Power Test button
14
.
5500K +/- button
15
.
3200K+/- button
（
Short press color temperature
+/- button, the brightness can
be accurately controlled by 1%;
long press to quickly adjust
the brightness.
）
Product Structure
Installation and fixed
Method Application
The functions in this manual are based on the test conditions of our company.
Further notice will not be given if the design and specifications change.
SHENZHEN YONGNUO PHOTOGRAPHY EQUIPMENT Co.Ltd.
Add:Building A, Shenfubao modern optics factory,Kengzi Street,
Pingshan District, Shenzhen
TEL:0755-8376 2448
Wed:www.hkyongnuo.com
Manufacture address:4/F,Building 2, Donglongxing Technology
Park,East Huaning Road, Dalang Street,L onghua District,Shenzhen
After-sales Service TEL:400-0013-888
Failure Analysis and Troubleshooting
Tripod interface
4
.
Use on fixed tripod
Rotate the
bracket knob,
adjust the fill
light angle as
needed
Capacity of battery is shown on the Nixie tube
