Place the back of the panel
(the side without grids) facing the ceiling.
Connect solar panels using the connecting-links
and connecting-buttons.
Top view when finished
Connect
There are connecting-links, connecting-buttons in the cylinder case.
Connecting-links and buttons are useful when users need to
securely connect solar panels to hang on a backpack.
Additional guidelines
-Please select a device according to the table below. This
maximizes solar charge efficiency. Other device configurations
may result in risk or damage to the Solar Paper.
- Direct sunlight is more efficient than sun through a window.
- Once your device has been charged over 90%, Solar Paper will
auto reset to slow down generating power. Strong sunlight won’t
affect the charging process, but weak sunlight will result in
frequent auto reset. For the sake of efficiency, we recommend
stop charging or charge a spare battery instead.
Place connecting-buttons.
Caution / Disclaimer
The manufacturer is not resposible for any damage or risk resulting
from improper use of Solar Paper. Additionally, any damage caused by
failing to follow the guidelines below will not be covered by the
warranty.
1. Keep Solar Paper out of children’s reach to prevent any potential
safety hazards, accidents and/or damages.
2. The panels have passed the IP54 waterproof test, but the controller
part may corrode if repeatedly exposed to water. This could
potentially damage the product, so make sure that the controller is kept
dry at all times. Avoid usage in rain or snowy conditions. Dry thoroughly
after exposure to water or humid conditions.
3. Dust and foreign substance can cause device malfunction. Prevent
these from entering the USB port.
4. Direct exposure to sunlight can damage electronic devices and can
hinder the charging process. Ensure that devices you wish to charge
are not exposed to sunlight while charging for best charging results
and for the safety of devices.
5. Do not connect more than 6 solar panels (15W) at one time.
6. Warrentied temperature is 60° for solar panels and 80° for PCB.
Using or storing Solar Paper in a heated vehicle in summer could
cause product malfunction.
7. Solar Paper is built to survive a shock from dropping, but dropping
the product on a frequent basis could impede efficiency or cause
damage. Beware that bending, applying strong force or placing heavy
weights on top of the product could cause malfunction.
8. Do not spray water or wipe the product with chemicals such as
benzol and/or paint thinner. It could cause fire, electrict shock, and
corruption of the surface.
9. If you detect a strange smell, noise, smoke, or foreign susbstance
while using Solar Paper, stop using it immediately, disconnect all
connected parts, and contact us.
10. Do not scratch the surface of solar panels.
11. The corner part of the panel has a hole in it and is relatively weak/
fragile, so do not apply pressure/strong force to it.
12. Do not touch the magnetict terminals with non-insulated metal.
It could damage the product or impede the charging process.
13. Disconnect your device after it has been fully charged.
14. Solar Paper does not generate power with the non-sunlight such as
fluorescent, LED, incandescent lamp.
15. When using the Solar Paper during the summer or in hot environment,
solar panels could become very hot. Use with caution and keep away
from sensitive skin parts such as face.
MSIP-REM-Nds
http://
Main panel 75g, Sub panel 65g
YKSP2.5, YKSP5, YKSP7.5, YKSP10
YKSP12.5, YKSP15, YKSP20
Components
Solar Paper,
Instruction manual,
Connecting-links,
Connecting-buttons,
Rope.
Or, you can use a rope included. It is good for hanging on a backpack.