3
5.3 Battery level indicator
The battery level indicator consists of four segments. When the battery is fully charged, the four segments will be all on.
In case of undervoltage, the outline of the battery indicator will flash, which means the battery has to be charged
immediately.
Full battery level indication
3-segment indication
2-segment indication
1-segment indication
Undervoltage flashing
Fig. 5-2 Battery Level Indicator Interface
5.4 Headlight indicator (reserved)
Headlight indication function needs separate wiring control, and its high level is effective.
Fig. 5-3 Headlight Indicator (Reserved) Interface
5.5 PAS level indicator (reserved)
PAS level indication function can be supported by one - line communication.
Fig. 5-4 PAS Level Indicator (Reserved) Interface
5.6 Steering indicator (reserved)
Steering indication function needs separate wiring control, and its high level is effective.
Fig. 5-5 Steering Indicator (Reserved) Interface
6. Speed acquisition modes
6.1 Acquisition Mode 1
Motor phase line speed measurement mode (according to the motor phase line voltage change simulation speed
display) : Three output core wire of instrument (Power wire VCC, Ground wire GND, Phase line speed measurement signal
A).
