YOKOGAWA ys100 series, Руководство по замене

Страница: 5 / 19

TI 01B08A02-07EN
5
2014.06.13
2. Old model conversion flow chart
Start up YSS1000
Operate.
Select one of the following tasks from the menu “Convert”.
Convert data.
The Basic window is displayed.
Download to YS1000
Save the data to a file.
Review parameters.
Set input specifications.
Perform tuning.
Debug user program.
Check operation.
Review user program.
Select “YS1000 Configuration Function” in the Select YSS1000 Function window.
Convert
YSS20 file
Read
YSS20 file
Upload
All YS100
SLPC
User program
Check program.
User program
Direct input
Yes
Yes
Yes
No
No error
When in YS1700 programmable mode only
Error
No
No
Convert
by reading
directly from
YS100 file
Convert from
SLPC user ROM
►Section 2.13.2 ►Section 2.13.3
► 2.4 Setting Parameters, Control Period,
K Register, and P/X/Y Register
► 2.11.7 Saving Files under a Different Name
► 2.7 Downloading Data
► Chapter 3 User Program Creation Guide
► 2.10.2 Monitoring Register Data
► 2.10.4 Monitoring Control Module Function Blocks
► 2.10.5 Monitoring Modules
► 2.10.1 Monitoring Tuning Data
► User’s Manual of respective controllers
for adjustment of direct input (temperature,
resistance, frequency)
►Refer to YSS1000 Setting Software /
YS1700 Programmable Function
User’s Manual
►Section 2.13.1