YOKOGAWA YewSeries 80, Руководство пользователя

Страница: 11 / 66

2-1
IM 01B04K02-02E
General
1
2
3
App
1
2
3
5
6
7
8
4
General
The SALD mV and temperature alarm unit receives a mV DC, thermocouple or RTD
(resistance temperature detector) input directly, compares this input with an alarm set point,
and outputs an alarm contact signal. The input has one or two absolute-alarm outputs.
Direct or reverse alarm action can be selected for each of the alarm output set points. The
front panel is provided with an alarm LED indicator lamp for confirming alarm relay action
(when relay is energized).
The JHT200 Handy Terminal*1 is used for setting the SALD parameters.
On the SALD model with display setter (SALD-x04), input indication (engineering unit) can
be displayed and alarm set points can be displayed / set on the front panel.
*1: The modular jack conversion adapter (E9786WH) is required for connecting the JHT200 Handy
Terminal to the mV and Temperature Alarm Setter.
The 5 pin-connector type communication cable (F9182EE) and modular jack conversion adapter
(E9786WH) is required for connecting the BT200 BRAIN Terminal of YOKOGAWA ELECTRIC
Corporation.
F0201.ai
Figure 2-1 External View
Chapter 2 General