YOKOGAWA XS550, Руководство пользователя

Страница: 39 / 44

8-8
<General Specifications>
IM 01W06F02-01EN
8.5 Regulatory Compliance Statements
This device satisfies the following standards.
*: Please confirm that an installation region fulfills an applicable standard. If additional regulatory
information and approvals are required, contact a Yokogawa representative.
CE Conformity:
The Authorized Representative for this product in the EEA is:
Yokogawa Europe B.V. Euroweg 2, 3825 HD Amersfoort, THE
NETHERLANDS.
RoHS Directive:
EN50581
EMC Directive:
EN61326-1 Class A Table 2, EN61326-2-3, EN55011 Class A
CAUTION
This instrument is a Class A product, and it is designed for use in the
industrial environment. Please use this instrument in the industrial
environment only.
Other Normative Standards:
Safety: EN61010-1, EN61010-2-30 (Indoor/Outdoor use)
(1) Pollution Degree 2
“Pollution degree” describes the degree to which a solid, liquid, or
gas which deteriorates dielectric strength or surface resistivity is
adhering. “2” applies to normal indoor atmosphere. Normally, only
non-conductive pollution occurs. Occasionally, however, temporary
conductivity caused by condensation must be expected.
(2) Installation Category I
“Overvoltage category (Installation category)” describes a number
which defines a transient overvoltage condition. It implies the
regulation for impulse with stand voltage. “I” applies to electrical
equipment which is supplied from the circuit when appropriate
transient overvoltage control means (interfaces) are provided.