manualshive.com logo in svg

YOKOGAWA WT5000, Руководство пользователя

Поделиться
Скачать
YOKOGAWA WT5000 Скачать руководство пользователя страница 148

7-10

IM WT5000-02EN

7.4  Starting (Rec), Pausing (Pause), and Ending 

(End) Storage

► “Starting, Pausing, and Ending Storage Recording” in the features guide

This section explains operating procedures using the following setup methods.
•  Procedure Using the Menu Icons (see page iii)
•  Procedure Using the Keys (other than SETUP) (see section 1.2 in IM WT5000-03EN)

 CAUTION

During storage, the storage device is constantly being accessed, even though the icon that 
indicates this is not displayed. Do not remove the USB memory device or turn the power off. 
Doing so may damage the storage device or corrupt its data.

  Storage in progress: While the REC key or PAUSE key is illuminated

French

 ATTENTION

Pendant la collecte, le système a constamment accès au support de stockage, même si l’icône 
qui l’indique n’est pas affichée. Ne retirez pas le support de stockage USB et ne coupez pas 
l’alimentation. Vous risqueriez d’endommager le support de stockage ou les données qu’il 
contient.

  Le stockage est en cours quand la touche STORE START est éclairée ou quand elle 

clignote, ou bien quand la touche STORE STOP clignote.

Содержание WT5000










































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды