manualshive.com logo in svg

YOKOGAWA WT5000, Руководство пользователя

Поделиться
Скачать
YOKOGAWA WT5000 Скачать руководство пользователя страница 141

7-3

IM WT5000-02EN

•  When the Storage Mode Is Real Time

 

  

Computation/Output tab

Configure the storage.

Storage control setup screen (when the storage mode is Real Time)

Set the storage interval 

(see page 7-2).

Set the scheduled storage start time.

Set the scheduled storage end time.

Set whether to save (store) numeric data at the start of 

storage.

You cannot set this when the storage interval is set to 00:00:00.

OFF: Not be saved

ON: Saved

  Setting the Scheduled Start Time

 Tap 

Start Time

 or 

End Time

. A Real-time Control screen appears.

 

   

Scheduled storage start time

Set the scheduled start and stop times

(Year/month/day, 00 hours : 00 minutes : 00 seconds to 23 hours : 59 minutes : 59 seconds).

Set the scheduled time 

to the current time.

Scheduled storage end time

Set the scheduled time to 

the integration start time.

Tap Start.

Tap End.

7.1  Setting the Storage Operation

Содержание WT5000










































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды