manualshive.com logo in svg

YOKOGAWA WT5000, Руководство по функциям

Поделиться
Скачать
YOKOGAWA WT5000 Скачать руководство пользователя страница 169

19-3

IM WT5000-01EN

System Configuration (System Configuration)

The following settings can be configured.
•  Date and time
• Language
•  LCD adjustment
•  Environmental settings (Preference)
•  USB keyboard language

Date and Time (Date/Time)

The instrument date and time.

Display ON/OFF (Display)

Set whether to show the date and time on this Instrument.

Setting Method (Setting Method)

You can set the method for setting the date and time to one of the following options.
•  Manual (Manual): Set the date or time manually.
•  SNTP: Use an SNTP server to set the time (valid when Ethernet communication is being used).

Date and Time (Date/Time)

This setting is valid when the method for setting the date and time is set to Manual.
Sets the date and time.
•  Setting the date
  The format for setting the date is YYYY/MM/DD (year/month/day). Set the year using the last two digits of the 

year according to the Gregorian calendar.

•  Setting the time
  The format for setting the time is HH:MM:SS (hour:minute:second). The hour can be set to a value from 0 to 

23.

Time Difference from Greenwich Mean Time (Time Difference from GMT)

This setting appears when the method for setting the date and time is set to SNTP.
Set the time difference between the region where you are using the instrument and Greenwich Mean Time to a 
value within the following range.

–12 hours 00 minutes to 13 hours 00 minutes

For example, Japan standard time is ahead of GMT by 9 hours. In this case, set Hour to 9 and Minute to 00.

  Checking the Standard Time

  Using one of the methods below, check the standard time of the region where you are using the instrument.

•  Check the Date, Time, Language, and Regional Options on your PC.
•  Check the website at the following URL: http://www.worldtimeserver.com/

•  This instrument does not support Daylight Saving Time. To set the Daylight Savings Time, reset the time 

difference from Greenwich Mean Time.

•  Date and time settings are backed up using an internal lithium battery. They are retained even if the power 

is turned off.

•  This instrument has leap-year information.
•  The Time Difference from GMT setting is shared with the same setting found in the SNTP settings in the 

Ethernet communication (Network) settings. If you change this setting in the date and time settings, the 
Time Difference from GMT in the Ethernet communication (Network) settings also changes.

19  Utility

Содержание WT5000




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды