manualshive.com logo in svg

YOKOGAWA WT5000, Руководство по функциям

Поделиться
Скачать
YOKOGAWA WT5000 Скачать руководство пользователя страница 136

14-13

IM WT5000-01EN

Starting, Stopping, and Resetting Integration

You can start, stop, and reset integration using the touch panel buttons, front panel keys, or communication 
commands. The relationships between integration and starting, stopping, and resetting are indicated below.

Integrated 

value

Integration 

time

Timeout

Timer value

Start

Stop

Start

Stop

Reset

Start

Reset

Starting Integration (Start, START)

•  Integration starts under the different conditions indicated below depending on the integration mode.

•  Manual integration mode, standard integration mode, and continuous integration mode
  Integration starts immediately.
•  Real-time normal integration mode and real-time continuous integration mode
  This instrument enters into an integration-ready state. Integration starts when the scheduled start time is 

reached.

•  When integration starts, the START key illuminates, and the integration status shows  .

•  When this instrument enters an integration-ready state, the START key blinks, and the integration status 

shows  .

Stopping Integration (Stop, STOP)

•  You can force integration to stop. The integration time and integrated value are held.
•  When you force integration to stop, the STOP key blinks, and the integration status shows  . Tapping Start 

or pressing START resumes the integration. However, after the automatic stopping of integration, which is 
discussed later, you cannot tap Start or press START to resume integration.

Automatic Stopping of Integration

•  Integration stops automatically under the different conditions indicated below depending on the integration 

mode. The integration time and integrated value are held. After integration stops automatically, you cannot 
resume it by tapping Start or pressing START. To start integration, reset it first.
•  When the integration mode is manual integration mode, standard integration mode, or real-time normal 

integration mode

  After the specified timer time elapses, integration stops automatically. The STOP key illuminates, and the 

integration status shows  .

•  When the integration mode is real-time normal integration mode or real-time continuous integration mode
  Integration stops automatically when the scheduled integration end time is reached. The STOP key 

illuminates, and the integration status shows  .

14  Integrated Power (Watt Hours/Ampere Hours)

Содержание WT5000




















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды