YOKOGAWA WT310EH, Руководство пользователя

Страница: 58 / 104

6-18 IM WT310E-17EN
:MEASure?
Function Queries all measured and computed data output
settings.
Syntax
:MEASure?
:MEASure:AVERaging?
Function Queries all
averaging settings.
Syntax
:MEASure:AVERaging?
:MEASure:AVERaging[:STATe]
Function Sets or queries the on/off state of averaging.
Syntax
:MEASure:AVERaging[:STATe]
{<Boolean>}
:MEASure:AVERaging:STATe?
Example :MEASURE:AVERAGING:STATE ON
:MEASURE:AVERAGING:STATE?
-> :MEASURE:AVERAGING:STATE 1
:MEASure:AVERaging:TYPE
Function Sets or queries the averaging type.
Syntax
:MEASure:AVERaging:TYPE
{LINear|EXPonent}
:MEASure:AVERaging:TYPE?
Example :MEASURE:AVERAGING:TYPE LINEAR
:MEASURE:AVERAGING:TYPE?
-> :MEASURE:AVERAGING:TYPE LINEAR
Description The averaging of harmonic measurement
functions (option) is only valid when the type
is set to EXPonent. For details, see the User’s
Manual, IM WT310E-01EN.
:MEASure:AVERaging:COUNt
Function Sets or queries the averaging coefficient.
Syntax
:MEASure:AVERaging:COUNt {<NRf>}
:MEASure:AVERaging:COUNt?
<NRf> = 8 , 16 , 32 , 64 (moving average count or
attenuation constant)
Example :MEASURE:AVERAGING:COUNT 8
:MEASURE:AVERAGING:COUNT?
-> :MEASURE:AVERAGING:COUNT 8
Description The averaging of harmonic measurement
functions (option) is only valid when TYPE is set
to EXPonent (attenuation constant). For details,
see the User’s Manual, IM WT310E-01EN.
6.10 MEASure Group
The commands in this group deal with computation.
You can make the same settings and queries that you can by pressing SETUP on the front panel and using the AVG
menu or by pressing MAX HOLD on the front panel.
:MEASure:MHOLd
Function Sets the
MAX hold on/off state.
Syntax
:MEASure:MHOLd {<Boolean>}
:MEASure:MHOLd?
Example :MEASURE:MHOLD ON
:MEASURE:MHOLD? -> :MEASURE:MHOLD 1