YOKOGAWA WT3002E Скачать руководство пользователя страница 121

Страница: 121 / 256

7-18

IM WT3001E-51EN

Selecting the Displayed Items from the Menu

Press

ITEM

to display the Numeric menu.

• Selecting the Item to Be Changed

Press the

Item No.

soft key.

Press the

cursor keys

to select the item to be changed. The item to be changed

is highlighted.

• Changing the Measurement Function

Press the

Function

soft key to display the measurement function selection box.

Press the

cursor keys

to select any of the measurement functions starting with

None.

Press

SET

. The symbol for the selected measurement function and the numeric

data are displayed at the highlighted position.

• When the display mode is set to Single List or Dual List, only the measurement

functions that contain harmonic order data can be selected. (U, I, P, S, Q, λ, φ, φU, φI, Z,

Rs, Xs, Rp, and Xp)

• Changing the Element/Wiring Unit

Press the

Element/Σ

soft key to display the element/wiring unit selection box.

Press the

cursor keys

to select any of the elements/wiring units starting with

Element1.

Press

SET

. The symbol for the selected element number or wiring unit and the

numeric data are displayed at the highlighted position.

• Changing the Order

10.

Press

Order

soft key.

11.

Press the

cursor keys

to set the order. The specified harmonic order and the

numeric data are displayed at the highlighted position. This completes the
procedure for changing the displayed items using the menu.

• When the display mode is set to Single List or Dual List, you do not have to set the

order.

7.4 Changing the Displayed Items of Numeric Data

Содержание WT3002E

































































































































































































































































Результаты поиска

Содержание WT3002E

Отзывы:

Бренды по названию

Популярные бренды

YOKOGAWA WT3002E, Руководство пользователя

Результаты поиска

Содержание WT3002E

Отзывы:

Бренды по названию

Популярные бренды