manualshive.com logo in svg

YOKOGAWA WT3001E, Руководство пользователя, Страница: 156 / 179

Поделиться
Скачать
YOKOGAWA WT3001E Скачать руководство пользователя страница 156

6-112

IM WT3001E-17EN

6.23  WAVeform Group

The commands in this group deal with the output of the retrieved waveform display data.
There are no front panel keys that correspond to the commands in this group.

:WAVeform?

Function 

Queries all settings related to the output of 
waveform display data.

Syntax

 :WAVeform?

Example 

:WAVEFORM? -> :WAVEFORM:TRACE U1; 
FORMAT ASCII;START 0;END 1001; 
HOLD 0

:WAVeform:BYTeorder

Function 

Sets the output byte order of the waveform 
display data (FLOAT format) that is transmitted 
by “

:WAVeform:SEND?

” or queries the current 

setting.

Syntax

 

:WAVeform:BYTeorder {LSBFirst| 
MSBFirst}

 :WAVeform:BYTeorder?

Example

  :WAVEFORM:BYTEORDER LSBFIRST

 

:WAVEFORM:BYTEORDER? -> 
:WAVEFORM:BYTEORDER LSBFIRST

Description  This value is valid when “

:WAVeform:FORMat

” 

is set to “

{FLOat}

.”

:WAVeform:END

Function 

Sets the output end point of the waveform display 
data that is transmitted by “:WAVeform:SEND?” 
or queries the current setting.

Syntax

 

:WAVeform:END {<NRf>}

 :WAVeform:END?

 

<NRf> = 0 to 1001

Example

  :WAVEFORM:END 1001

 

:WAVEFORM:END? ->  
:WAVEFORM:END 1001

:WAVeform:FORMat

Function 

Sets the format of the waveform display data that 
is transmitted by “:WAVeform:SEND?” or queries 
the current setting.

Syntax

 

:WAVeform:FORMat {ASCii|FLOat}

 :WAVeform:FORMat?

Example

  :WAVEFORM:FORMAT FLOAT

 

:WAVEFORM:FORMAT? -> :WAVEFORM:FORMAT 
FLOAT

Description  For the differences in the waveform display 

data output due to the format setting, see the 
description for “

:WAVeform:SEND?

.”

:WAVeform:HOLD

Function 

Sets whether to hold (ON) or release (OFF) all 
the waveform display data or queries the current 
setting.

Syntax

 

:WAVeform:HOLD {<Boolean>}

 :WAVeform:HOLD?

Example

  :WAVEFORM:HOLD ON

 

:WAVEFORM:HOLD? -> :WAVEFORM:HOLD 1

Description •  If 

:WAVeform:HOLD

 is turned ON before 

executing “

:WAVeform:SEND?

,” all the 

waveform data at that point can be held 
internally.

 

•  As long as 

:WAVeform:HOLD

 is ON, the 

waveform data is held even when the 
waveform display on the screen is updated.

 

•  For example, if you wish to retrieve the 

waveform display data of U1 and I1 at the 
same point, do the following:

 

  :WAVeform:HOLD ON

 

  :WAVeform:TRACe U1

 

 :WAVeform:SEND?

 

  (Receive the waveform display data of U1)

 

  :WAVeform:TRACe I1

 

 :WAVeform:SEND?

 

  (Receive the waveform display data of I1)

 

:WAVeform:HOLD OFF

 

•  If ON is specified when 

:WAVeform:HOLD

 

is ON, the waveform display data is cleared 
once, and the most recent waveform data is 
held internally. This method can be used when 
retrieving waveform display data continuously 
(no need to set 

:WAVeform:HOLD

 to OFF 

each time).

:WAVeform:LENGth?

Function 

Queries the total number of points of the 
waveform specified by :WAVeform:TRACe.

Syntax

 :WAVeform:LENGth?

Example 

:WAVEFORM:LENGTH? -> 1002

Description  The number of data points is fixed. “1002” is 

always returned.

Содержание WT3001E




















































































































































































Отзывы:

Нет отзывов