YOKOGAWA wt3000, Руководство пользователя, Страница: 88 / 384

3-24
IM 760301-01E
3.12 Setting the Date/Time
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY ITEM & ELEMENT
RESET SET
PAGE PAGE
SCALING
HRM SET MEASURE SYNC SOURCE
AVG LINE FILTER
FREQ
FILTER
FILE
PRINT MISC
STORE IMAGE SAVE
HELP
NUMERIC WAVE
OTHERS
ITEM FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
To exit the menu during operation, press
ESC
located above
the soft keys.
In the procedural explanation below, the phrase “press the
cursor keys
” may be used. This phrase refers to the
procedures for selecting items and entering values and
character strings. For details on the procedures, see section
3.14.
Cursor keys
1. Press
MISC
to display the Misc menu.
2. Press the
Date/Time
soft key to display the Date/Time dialog box.
• Turning ON/OFF the Date/Time Display
3. Press the
cursor keys
to select Display.
4. Press
SET
to select ON or OFF.
• Setting the Date or Time Manually
If the Ethernet interface option is installed, proceed to step 5.
If it is not, proceed to step 7.
5.
Press the
cursor keys
to select Type.
6. Press
SET
to set Type to Manual.
7. Press the
cursor keys
to select the Date (year, month, and day) or Time (hour,
minute, second) box.
8. Press
SET
to display the entry box.
9. Press the
cursor keys
to set the year, month, date, hour, minute, or second that
you selected in step 5.
10. Press
SET
or
ESC
to close the box.
11. Repeat steps 5 to 8 to set the entire year, month, date, hour, minute, and
second.
12. Press the
cursor keys
to select Set.
13. Press
SET
. If ON was selected in step 4, the new date and time are displayed in
the lower right corner of the screen. If the procedure is aborted without pressing
SET, the new settings are not reflected on the display.
If the Ethernet interface
option is installed
If the Ethernet interface option
is not installed