YOKOGAWA wt3000 Скачать руководство пользователя страница 252

Страница: 252 / 384

9-5

IM 760301-01E

App

Index

Saving and Loading Data

Explanation

• Storage Medium Information

Lists the information about the selected storage medium.

• Media Name:

Storage medium name.

• Media Size:

Total size.

• Used Space:

Size of the used area.

• Vacant Space:

Size of the free area.

• Partition Size:

Number of partitions.

• Formatting the PC Card/USB Memory

The PC card or USB memory is formatted to FAT format.

• Number of Partitions.

You can set partitions on the PC card. However, PC cards that are handled as

removable disks cannot be partitioned. You can select 1 or 2 for the number of

partitions.

Note

•

Note that if you format a storage medium that has data stored on it, all of the stored data are

cleared.

•

It takes a few seconds to format a PC card.

• Selecting the Storage Medium to be Formatted

The explanation is the same as that given in “Selecting the Storage Medium and

Directory” in section 9.3.

9.2 Formatting the Storage Media

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 252 / 384

Результаты поиска

Содержание wt3000

Отзывы: