YOKOGAWA wt3000, Руководство пользователя, Страница: 246 / 384

8-21
IM 760301-01E
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Storing and Recalling Data and Saving the Stored Data
8.6 Recalling the Stored Data
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY ITEM & ELEMENT
RESET SET
PAGE PAGE
SCALING
HRM SET MEASURE SYNC SOURCE
AVG LINE FILTER
FREQ
FILTER
FILE
PRINT MISC
STORE IMAGE SAVE
HELP
NUMERIC WAVE
OTHERS
ITEM FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
To exit the menu during operation, press
ESC
located above
the soft keys.
In the procedural explanation below, the phrase “press the
cursor keys
” may be used. This phrase refers to the
procedures for selecting items and entering values and
character strings. For details on the procedures, see section
3.14.
Cursor keys
• Recalling the Data
1. Press
SHIFT
+
STORE(STORE SET)
to display the Store Set menu.
2. Press the
Mode
soft key to select Recall.
3. Press the
cursor keys
and set the Recall No. (number of the data to be
recalled). The corresponding data is displayed.
• Initializing (Clearing) the Internal Memory
The procedure to clear the internal memory varies depending on the store mode. This
section describes the procedures when the store mode is recall. For the procedures
when the store mode is store, see section 8.4.
4. Press the
Initialize Memory Exec
soft key.
If the alert indication for internal memory initialization (section 8.3) is ON, the Alert
dialog box appears. Proceed to step 5. If the indication is OFF, the data in the internal
memory is cleared without displaying the Alert dialog box.
5. Press the
cursor keys
to select OK or Cancel.
6. Select OK and press
SET
to clear the data in the internal memory. Select
Cancel and press
SET
to not clear the data in the internal memory.