YOKOGAWA wt3000 Скачать руководство пользователя страница 219

Страница: 219 / 384

7-13

IM 760301-01E

App

Index

Trend Display

Explanation

The trends can be assigned to the divided windows.

• Selecting the Number of Screen Divisions

Select the number of divisions of the screen from the choices below. This is the same

as with the waveform display (section 6.6).

• Single: No division

• Dual: 2 divisions

• Triad: 3 divisions

• Quad: 4 divisions

The number of displayed points in the vertical direction of one divided window varies

depending on the number of divisions as follows:

Single: 432 points, Dual: 216 points, Triad: 144 points, Quad: 108 points

• Waveform Mapping

The trends that are turned ON (see section 7.2) are assigned in order according to the

trend number (T1 to T16) to the divided windows. This corresponds to the “Auto”

setting for the waveform display.

7.6 Displaying Trends on Divided Windows

Содержание wt3000

































































































































































































































































































































































































Результаты поиска

Содержание wt3000

Отзывы:

YOKOGAWA wt3000, Руководство пользователя, Страница: 219 / 384

Результаты поиска

Содержание wt3000

Отзывы: